20 Amax Avenue Girraween NSW 2145
Ph: 02 9636 8244
Fax: 02 9631 8615

Industrial Galvanizers (Sydney) has two galvanizing baths to allow the processing of both structural steel and for the centrifuge galvanizing of small parts.

The structural bath dimensions are:
Length 12.5 metres
Width 1.7 metres
Depth 2.4 metres
Maximum lifting capacity 6 tonnes

The centrifuge (spinning) bath dimensions are:
Length 6.7 metres
Width 1.24 metres
Depth 1.64 metres

The structural galvanizing plant can handle fabrications up to 6 tonnes in weight. Columns and beams up to 16.5 metres in length, depending on their web height, and items up to 3.8 metres wide (and less than 12 m long) can also be galvanized by double-dipping.

The centrifuge plant can handle a range of products from small fasteners to threaded items up to 3 metres in length.

A pickup and delivery service is available. Industrial Galvanizers Coating Guarantees for periods up to 50 years are also available on specific projects and reliable service is backed up by Industrial Galvanizers other galvanizing plants in the NSW network in Newcastle and Port Kembla.

Experienced local staff are available to assist with design, technical enquiries and any special requirements related to scheduling and transport.

Key Contacts:

NSW General Manager
Nick Cameron
Tel: 02 9636 8244

NSW Operations Manager
Barry Hines
Mobile: 0425 299 070
Email: bhines@ingal.com.au

Sales Representative
Tony Maggio
Ph: 0401 712 093

Sales Represntative
David Munro
Ph: 0419 283 831
Email : dmunro@ingal.

Accountant
Rajah Lakshman
Ph: 02 9636 8244
Email : rlakshman@ingal.com.au

Operations Manager
Sunny Krishna
Mobile: 0419 656 070
Email: skrishna@ingal.com.au