HOME | ABOUT US| PLANTS | IG COMPANIES AUS | IG COMPANIES INTERNATIONAL | LINKS | CONTACT  
     
 
INGAL BUILDING SYSTEMS


Ingal Lintel Range:

The Ingal Lintel range was developed and manufactured in Australia for supporting brickwork in Australian homes.

Ingal Lintels
Ingal Lintels are cold formed with a ribbed profile to provide maximum performance with minimum weight and hot dip galvanized to AS/NZS 4680:1999 and in accordance with the Building Code of Australia for protective coating on steel embedded in masonry. All Ingal lintels comply with AS2699.3:2002 and have a durability rating of R3.


Ingal Arch Bars
Ingal Archbars are hot rolled and hot dip galvanized to AS/NZS 4680:1999 and in accordance with the Building Code of Australia for protective coating on steel embedded in masonry. All Ingal arch bars comply with AS2699.3:2002 and have a durability rating of R3.

Please note the sections detailed in the following table as ‘standard stock lengths’ may change from time to time.  Please call Ingal on 1800 701 555 to find out the current lengths that are held in stock.


Ingal TeeBeam
Ingal TeeBeams are an extremely 'user friendly' product, which has been designed for strength, while minimising work for builders. Specifically, Ingal TeeBeams have been developed to act as a structural member and do not require the composite action of the masonry to support designated loads. When using Ingal TeeBeams there is no need to apply mortar between the brickwork and the TeeBeam to form a composite member. Simply select a suitable TeeBeam (up to 6m) and lay the brickwork directly over the TeeBeam.

Ingal Longspan TeeBeam
INGAL Longspan TeeBeams are sold in NSW and Qld and are manufactured from 200x6 (horizontal) and 250x10 (vertical) materials. Stock lengths range from 4,200mm to 6,000mm.

 

 

Ingal South TeeBeam
INGAL South TeeBeams are manufactured specially for the Victorian, South Australian and Tasmanian market. Products available are listed below:-

2,700mm to 3,000mm 200x6 (horizontal) +200x6 (vertical)
2,700mm to 6,000mm 200x10 (horizontal) + 200x10 (vertical)
5,700mm to 6,000mm 200x10 (horizontal) + 250x10 (vertical)
5,700mm to 6,000mm 200x10 (horizontal) + 250x12 (vertical)

Further technical enquiries
For further technical enquiries, including section properties, please contact us on:-
Toll Free: 1800 701 555



 

 




© 2006 Industrial Galvanizers Corporation Pty Ltd | Environmental Policy | Disclaimer | Privacy | Site by www.noddingdogdesign.com